GEEKVAPE SONDER Q KIT

A lightweight and aesthetically pleasing pod

The Sonder Q bears the hallmark of Geekvape, the manufacturer that has taken care to ensure its transportability. The pod measures only 108.91 x 23.8mm and weighs only 39.1g. It is therefore easy to slip into a pocket and its lightness is undeniable. As for its grip, it is all the more comfortable as this pod has rounded edges.

In addition, Geekvape has given the Sonder Q a nice aesthetic touch. This is the Sonder inscription in capital letters on the front. This inscription is in fact a warning light to inform about the remaining battery level. The vaper will therefore have this luminous button permanently in front of his eyes, which is both aesthetic and practical.

The Sonder Q : an easy-to-use kit

The Sonder Q does not lack autonomy. It has a built-in 1000 mAh battery and it is possible to vape for 2 days without recharging. Moreover, the Sonder indicator shows the battery level in 3 colours :

• The green colour when the charge level is above 60%
• Blue when the charge level is between 30 and 60%
• Red when the charge level is below 30%

Then, when the battery is depleted, the USB Type-C cable (not included) must be used to recharge it.

The Sonder Q's power level is moderate, with a maximum of 20W and a minimum of 5. It is therefore suitable for beginners and can remain stable despite a low battery level.

In addition, beginners will be delighted by the simplicity of use that is offered to them. This pod does not require any adjustments. Its power is automatically adjusted according to the coil value and the auto-draw system allows you to activate this device by simply inhaling. There is not even a button to press.

Finally, the user will vape serenely, 3 safety devices are present : a device against inhalations too long (over 10 seconds), a device against short circuits and a device against excessive discharge of the battery.

A 2ml cartridge, VPU technology and a MTL and RDL draw

The Sonder Q will definitely not disappoint the vaper. Geekvape has equipped it with a 2ml cartridge that fills from the top, provides comfort to the lips and gives the possibility of vaping in both MTL and RDL. But Geekvape goes further. It has equipped this pod with VPU technology, which stands for Vapour Prospect Uncovers. This technology improves the flavours by softening them and extends the life of the coil.

Otherwise, the airflow can be adjusted with the sliding switch on the side of the battery. The owner will then switch from an airflow to a tight draw or vice versa.

Finally, this cartridge has a built-in resistor. This can be either 0.6 ohm (18-25W) or 0.8 ohm (12-18W), and Geekape supplies the 0.8ohm cartridge. Incidentally, these cartridges are compatible with the brand's other Q models.

This is a pod that vapers will not soon forget. Because how can you forget an electronic cigarette that combines transportability, ergonomics, autonomy, ease of use, versatility of draws and quality of flavors ?

Contents :

• 1x Sonder Q device (1000 mAh)
• 1x cartridge with a built-in 0.6 ohm coil
• 1x cartridge with a built-in 0.8 ohm coil
• 1x user manual